Smart Curtain - 1 Layer
-
US$399.00 US$499.00
Related Products
Life In Motion
Silent Design
Noise reduction design to ensure that the operating noise is below 40db.Elegant Operation
Light open and light close function make the curtain movement smooth and elegant.Memorized Limit
No manual setting is required. The motor will automatically adjust the error to ensure that the track route is accurate.Obstruction Detection
You can pull the opening or closing curtain to stop it immediately.Light Touch – Start
When pulling the curtain into one direction, the curtain will automatically run until totally open or close.Manual Override
No matter energized or not. You can always open and close the curtain with traditional manual way.Mid-limit function
Depending on the need of daylighting. A stop point can be setted to auto stop the curtain at certain point.5-Year Motor Warranty
Special high strength motor, the system is tested by 15000 times without distortion. Our 5-Year warranty prove our confidence.Features
Full Demo Video
Real Product Demo
Comparison
Yoswit Smart Switch
- 55 / 86 / 118 / 120
- Bluetooth
Schneider
(ULTI Ezinstall3)
- 55 / 86
- RF
Legrand
(Arteor/Adorne/Radiant)
- 1 Layer
- 55 / 86 / 120
- Zigbee / RF
Leviton
(Decora)
LUTRON
(Caseta)
Run Your Home from Your Phone
Bluetooth Version
We use Bluetooth 4.2 (also sometimes referred to as Bluetooth Low Energy or BLE) as the core processor of our products.
Compatible Devices
We support all Smart Ready products with our application installed. Please Click Here to get the growing list.
IOS Support
We support IOS 7.0 or above versions. Also, we have separate applications with different resolution for iPhone and iPad.
Android Support
We support Android 4.3 or above versions. It's the first Android version with Bluetooth Smart support which has just been released on Aug 2013.
General | |
Product Name | Yoswit Curtain Motor |
Model | YO1007CU |
Manufacturer | Designed by Yoswit in Hong Kong. Assembled in China. |
Motor Technical Data | |
Safety Curtain Weight (kg) | 75 (230V) / 75 (120V) |
Rated Power | 121 (230V) / 107 (120V) |
Open/Close Speed (cm/sec) | 20 (230V) / 24 (120V) |
Rated Current (A) | 0.27 (230V) / 24 (120V) |
Running Time | 4 (230V) / 4 (120V) |
Degree of Protection (IP) | 20 (230V) / 20 (120V) |
Maximum Turns (Turns) | No limit |
Track Length (m) | ≤12 (230V) / ≤12 (120V) |
Weight (kg) | 1.10 (230V) / 1.10 (120V) |
Product Certificate | CE, RoHS |
Mechanical | |
Surface Materials | V0 flame-resistant PC+ABS |
Storage Conditions | -20°C to 70°C |
Operating Environment | Indoors |
Operating Temperature Range | -10°C to 50°C |
Operating Humidity Range | 0-90% relative humidity, non-condensing |
Electrical | |
Input Voltage | AC100-240V |
Frequency | 50/60Hz auto detected at power-up |
Resistive Load Current | Max 20A |
Standby Power | <0.3 watt |
Wiring Options | Wiring details available on the Installation page |
Bluetooth | |
Product Compatibility | Bluetooth Smart Ready Products |
Frequency | 2.4GHz |
Radio Transmission Power | 0~4 dBm |
Bluetooth Range | Open area: >50m |
Bluetooth Version | Bluetooth 4.0 |
WARNING !
Disconnect Power
To prevent severe shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
Basic Installation
1
Search for a proper position to install the curtain track.
Reminder
Always install the curtain track horizontally on a flat surface.
2
Check the position of curtain brackets. The most appropriate distance for brackets is 2 pieces for every 1m track. Afterwards, add 1 piece for another 1m.
Reminder
Length of curtain track should exceed the width of your window by 20-30 cm on each side, while distance between curtain brackets should not be greater than 50 cm.
3
Assemble the curtain brackets to the curtain track with screws. Mount the curtain track with curtain brackets to a flat ceiling.
Warning
The bearing capacity of the sum of screws must be at least 300kg.
4
Assemble the curtain motor by inserting it to the curtain track. Turn the curtain motor anti-clockwise. The motor will be locked in a fixed position automatically.
5
Disconnect the power supply of your switch. If you are installing Yoswit curtain switch, please refer to the user manual of Yoswit curtain/roller switch.
Warning
To prevent severe shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
6
Connect the live, neutral and ground wires of motor to your switch.
Warning
To reduce risk of electrical shock, unit shall be properly grounded in accordance with local regulations or codes. Failure to connect the ground wire will result in an unsafe installation that could lead to personal injury.
Circuit Installation A
Circuit Installation B
7
Turn on the circuit breaker and connect to the power.
8
Test the motorized curtain by tapping your switch for several times.
9
Automatic limit setting
Limit cancellation
Installation complete.
Download the Yoswit App to your smart device and enjoy it now!
Yoswit will automatically detect the switch and add to your device list.
Download | |
Certification | EMC |
User Manual | Motor 55 curtain 86 curtain 118 curtain 120 curtain |
Data Sheet | Download |
Leaflet | Smart Curtain Full Catalogue Catalogue (ZH) |
Yoswit App | |
Yoswit App (Android Apk) | Download |